TermoEasy - video 
reading heat consumption in condo with ease and/or remotely 
How to install physically, how to configure, first readings...
 
The following videos want to be helpful, but they do not replace the paper manual which is small, concise and must be read. 
For any questions there are also: 
- TermoEasy user's forum... 
- Frequently asked questions... 
- contact form... 
 
SUPER VIDEO SUMMARY 
A very fast video (less than 1 minute) with wall installation, batteries, switch on, connection with smartphone, first display simple readings (common to all versions). 
 
 
For further information: 
- standard 
- remote wifi (RW) 
- remote gsm (RG) 
 
VIDEO STANDARD VERSION 
1s) installation and connection; 
You need: 
- to locate the Control unit 
- TermoEasy Standard 
- 4 x 1.5V AA alkaline batteries (from a supermarket or a household appliance store, etc. - no China); or 1.5V AA Lithium 
- large cross screwdriver; possibly a hammer 
- for wall mounting (which we recommend) -> 2 screw-type 5-6mm Fischer with 25mm screw; 5 or 6mm wall drill bit; drill 
 
 
2s) initial power on; first reading; possible first configuration of the apartment-radiator matches/groups; 
You need: 
- TermoEasy installed and connected 
- smartphone or PC Mac Linux (anything with web a browser installed) 
- for the configuration of the apartments-radiator groups you need the full reading from last year (in which, for each apartment, the codes of the counters / distributors are listed) or the installer's report that for each apartment lists the codes of the distributors / consumption counters: who has installed apartment by apartment the counters must have it (and supply it) 
Notice: in the video we have accelerated some phases, for example the first power on. 
 
In addition to the video, we have copied online some examples so you can see better: 
- example of simple reading (heat consumption in a condominium)... 
- example of heat consumption reading divided by apartment... 
 
3s) next power on 
They are like the one in point 2) but everything is faster. 
 
VIDEO RW VERSION (REMOTE WIFI) 
1w) installation and connection; 
You need: 
- to locate the control unit 
- TermoEasy RW or TermoEasy RG 
- 4 x 1.5V AA alkaline batteries (from supermarket or household appliance store, etc. - no China); or 1.5V AA Lithium 
- large cross screwdriver; possibly a hammer 
- for wall mounting (which we recommend) -> 2 screw-type 5-6mm fischer with 25mm screw; 5 or 6mm wall drill bit; drill 
 
 
2w) initial power on; first reading; first data sending to the server through WiFi; 
You need: 
- TermoEasy installed and connected 
- WiFi access data for the WiFi you want to connect to (= precise WiFi name and password) 
- smartphone or PC Mac Linux (anything with a web browser installed) 
Notice: in the video we accelerated some phases; 
 
 
3w) you can check at any time that TermoEasy, when in the OFF/SLEEP position, is correctly "sleeping" while waiting for the next reading (for example in 15 days) 
 
 
4w) remote reading; possible configuration of the apartments-radiator groups; 
You need: 
- to have correctly connected and configured TermoEasy; it must have sent at least the first reading 
- smartphone or PC Mac Linux (anything with a web browser installed; to change from above here in this video we use a PC...) 
- for the configuration of the apartments-radiator groups you need the full reading from last year (in which, for each apartment, the codes of the counters / distributors are listed) or the installer's report that for each apartment lists the codes of the distributors / consumption counters: who has installed apartment by apartment the counters must have it (and supply it) 
 
In addition to the video, we have frozen and copied one reading so you can see better: 
- remote reading of heat consumption when TermoEasy RW (WiFi) or RG (GSM) is installed in the condo... 
- the remote reading "restricted" (the separate login where people can't touch settings)... 
 
5w) subsequent power ONs 
If you manually switch TermoEasy ON, it performs a reading like the one at point 2w) and for a few minutes it will stay in the wifi-station mode (ie it is accessible and configurable from a smartphone via the termoinfo.com network / site). After 5 minutes, it switches to remote WiFi mode by connecting to the external wifi you have configured. To bring it back to the internal wifi for configuration, turn it off and then ON again. 
Or the power ON takes place automatically via the internal timer: reads, sends data, turns off. 
 
VIDEO RG VERSION (REMOTE GSM) 
1g) installation and connection; 
You need: 
- to locate the control unit 
- TermoEasy RG 
- 4 x 1.5V AA alkaline batteries (from supermarket or household appliance store, etc. - no China); or 1.5V AA Lithium 
- large cross screwdriver; possibly hammer 
- for wall mounting (which we recommend) -> 2 screw-type 5-6mm fischer with 25mm screw; 5 or 6mm wall drill bit; drill 
- the SIM for connection to the Internet via the cellular network (to be inserted while inserting the batteries, in the video the insertion is not available); no SIM is required with a flat data plan, see notes in the manual 
 
 
2g) initial power on; first reading; first sending data to the server through GSM/Sim card; 
You need: 
- TermoEasy installed and connected 
- the name of the APN of the chosen GSM telephone provider (provided by the operator or can be searched on the internet) 
- smartphone or PC Mac Linux (anything with a web browser)  
Note: in the video we accelerated some phases 
 
 
3g) you can check at any time that TermoEasy, when in the OFF/SLEEP position, is correctly "sleeping" while waiting for the next reading (for example each 15 days) 
 
 
4g) remote reading; possible configuration of the apartments-radiator groups; You need:  
- to have installed and correctly connected and configured TermoEasy; to have seen that it sent at least the first reading  
- smartphone Android iPhone iPad or PC Mac Linux (anything with a web browser installed, just to change here we use a PC)  
- for the configuration of the apartments-radiator groups you need the full reading from last year (in which, for each apartment, the codes of the counters / distributors are listed) or the installer's report that for each apartment lists the codes of the distributors / consumption counters: who has installed apartment by apartment the counters must have it (and supply it) 
 
In addition to the video, we have frozen and copied one reading so you can see better: 
- remote reading of heat consumption when TermoEasy RW (WiFi) or RG (GSM) is installed in the condo... 
- the remote reading "restricted" (the separate login where people can't touch settings)... 
 
5g) next power ons are like the one in point 2g) or they happen automatically through the internal timer (reads, sends data and turns off).  
 
 
Buy TermoEasy from homepage... 
 
 
Video: 
- standard 
- remote wifi (RW) 
- remote gsm (RG) 
 
The videos want to be helpful, but they do not replace the paper manual that is small, concise and must be read; the Standard version has a basic manual; the RW and RG versions include the basic manual of the Standard and a second, equally short and concise manual. 
 
Frequent questions about TermoEasy... 
TermoEasy user's forum... 
TermoEasy summary: what it is, what it does, who needs it... 
More about the reading of the consumption of radiators heaters... 
Other questions, contact us.. 
 
Home page - TermoEasy - how to read heat consumption in condominiums with central heating for free or for less... / read mbus meter bus central unit... / remote metering remote GSM heat consumption reading 
(C) 2022 VisualVision and A.T.S.